FAILURE

REASON

SOLUTION

1

Hydraulic pump runs very loudly.

• Oil level is too low
• Thete is air in suction section of the pump
• Pump does not produce pressure
• Viscosity of oil is low
• Check the oil level
• Check the air input in pump suction connections
• Repair the pump
• Replace the oil

•  Check the oil level
• Check the air input in pump suction connections
• Repair the pump
• Replace the oil

2

Compaction plate runs with vibrations.

• Pump is broken
• Cylinders are broken
• Up and down compaction plate touches the sides
• Repair the pump
• Check the cylinders
• Setup the upper compaction plate side plates

• Repair the pump
• Check the cylinders
• Setup the upper compaction plate side plates

3

Compacted waste is less than capacity

• Safety ventiles on road ventiles are not set
• Pump does not produce required pressure
• Setup of safety ventiles must be done in Hidromak
• Repair the pump

• Setup of safety ventiles must be done in Hidromak
• Repair the pump

4

Discharge plate does not discharge the waste.

• Telescopic cylinder is broken.
• Safety ventile is not set
• There are clearances around discharge plate
• Repair the Telescopic cylinder
• Adjust the safety ventile
• Adjust the discharge plate adjustment plates

• Repair the Telescopic cylinder
• Adjust the safety ventile
• Adjust the discharge plate adjustment plates

5

The tailgate does not move down or moves down very fast

• The adjustment of the hose explosion ventiles is bad
• The adjustment of the ventiles is bad
• Adjust the hose explosion ventiles
• Adjust the constant setup ventiles

• Adjust the hose explosion ventiles
• Adjust the constant setup ventiles

6

Container arms do not hold up the container

• Pump is broken
• Road ventiles are not adjusted
• Oil seperator is not adjusted
• Repair the pump
• Adjust the safety ventiles
• Adjust the oil seperator

•  Repair the pump
• Adjust the safety ventiles
• Adjust the oil seperator

7

Container holding arms move down very fast

• Constant setup ventiles are not adjusted
• Adjust the constant setup ventiles

• Adjust the constant setup ventiles

8

There are leakages in hydraulic system

• Screws are loosened
• Tighten the screws

•  Tighten the screws

9

P.T.O. produces sound

• The gears depreciated
• Repair P.T.O.

•  Repair P.T.O.

10

Hydraulic system does not work

• Pump is broken
• Road ventiles are broken
• Hydraulic cylinders are broken
• Repair pump
• Adjust road ventiles
• Repair hydraulic cylinders

•  Repair pump
• Adjust road ventiles
• Repair hydraulic cylinders